View PSS9015B_589380.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D186
PSS9015B PNP general purpose transistor
Product specification Supersedes data of 2002 Sep 20 2004 Aug 10
Philips Semiconductors
Product specification
PNP general purpose transistor
FEATURES * Low collector capacitance. APPLICATIONS * General purpose switching and amplification * Low frequency, low noise amplifier. DESCRIPTION PNP transistor in a SOT54 plastic package. NPN complement: PSS9014. MARKING TYPE NUMBER PSS9015B MARKING CODE S9015B
handbook, halfpage
PSS9015B
PINNING PIN 1 2 3 collector base emitter DESCRIPTION
1
2 3
MSB033
Fig.1 Simplified outline (SOT54).
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Device mounted on a printed-circuit board; single sided copper; tinplated; standard footprint. PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature up to Tamb = 25 C; note 1 CONDITIONS open emitter open base open collector - - - - - - - -65 - -65 MIN. MAX. -50 -45 -5 -100 -200 -200 500 +150 150 +150 V V V mA mA mA mW C C C UNIT
2004 Aug 10
2
Philips Semiconductors
Product specification
PNP general purpose transistor
THERMAL CHARACTERISTICS SYMBOL Rth j-a Note 1. Device mounted on a printed-circuit board; single sided copper; tinplated; standard footprint. CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL ICBO PARAMETER collector-base cut-off current CONDITIONS VCB = -30 V; IE = 0 VCB = -30 V; IE = 0; Tamb = 150 C ICEO IEBO hFE VCEsat VBEsat VBEon fT Cc F Note 1. Pulse test: tp 300 s; 0.02. collector-emitter cut-off current emitter-base cut-off current DC current gain saturation voltage saturation voltage base-emitter turn-on voltage transition frequency collector capacitance noise figure VCE = -30 V; IB = 0 VEB = -5 V; IC = 0 IC = -1 mA; VCE = -5 V IC = -100 mA; IB = -5 mA; note 1 IC = -100 mA; IB = -5 mA; note 1 IC = -2 mA; VCE = -5 V IC = -10 mA; VCE = -10 V; f = 100 MHz VCB = -10 V; IE = Ie = 0; f = 1 MHz VCE = -5 V; IC = -0.2 mA; RS = 1 k; f = 1 kHz; B = 200 Hz MIN. - - - - 100 - - -600 100 - - PARAMETER thermal resistance from junction to ambient CONDITIONS in free air; note 1 VALUE 240
PSS9015B
UNIT K/W
TYP. - - - - 200 - - - - - -
MAX. -50 -5 -100 -100 300 -700 -750 - 7 10
UNIT nA A nA nA mV mV MHz pF dB
-1000 mV
2004 Aug 10
3
Philips Semiconductors
Product specification
PNP general purpose transistor
PSS9015B
103 handbook, halfpage h FE 102
MLD931
-104 handbook, halfpage VCEsat (mV) -103
MLD932
10
-102
1 -10-2
-10-1
-1
-10
-102 -103 IC (mA)
-10 -10-2
-10-1
-1
-10
-102 -103 IC (mA)
VCE = -5 V.
IC/IB = 20.
Fig.2
DC current gain as a function of collector current; typical values.
Fig.3
Collector-emitter saturation voltage as a function of collector current; typical values.
-104 handbook, halfpage VBEsat (mV) -103
MLD933
-104 handbook, halfpage VBE (mV) -103
MLD934
-102
-102
-10 -10-1
-1
-10
-102
IC (mA)
-103
-10 -10-2
-10-1
-1
-10
-102 -103 IC (mA)
IC/IB = 20.
VCE = -5 V.
Fig.4
Base-emitter saturation voltage as a function of collector current; typical values.
Fig.5
Base-emitter voltage as a function of collector current; typical values.
2004 Aug 10
4
Philips Semiconductors
Product specification
PNP general purpose transistor
PACKAGE OUTLINE
Plastic single-ended leaded (through hole) package; 3 leads
PSS9015B
SOT54
c
E d A L b
1
D
2
e1 e
3
b1
L1
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1)
max.
2.5
Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 97-02-28 04-06-28
2004 Aug 10
5
Philips Semiconductors
Product specification
PNP general purpose transistor
DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION
PSS9015B
This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
II
Preliminary data Qualification
III
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2004 Aug 10
6
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2004
SCA76
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R75/02/pp7
Date of release: 2004
Aug 10
Document order number:
9397 750 13687

▲Up To Search▲

Price & Availability of PSS9015B

	To Download PSS9015B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .